Paradise RA 5785 User Manual download pdf (Page 67)

Operations Manual, HPA3, Mini Compact Outdoor SSPA 208143 REV - 67

Table 8-7: System Settings Data Values

Data

Address

# Bytes Description Limits and Byte Values

1 1 System Operation Mode

Single Amplifier = 255

1:1 Redundant = 0

2 1 System Hierarchical Address Unit 1= 0; Unit 2= 255

3 1

Unit Start Up State

(in Redundancy)

On Line Amplifier = 255

Standby Amplifier = 0

4 1 Mute State

Mute Clear (Transmit Enable) = 255

Mute Set (Transmit Disable) = 0

5 1

Attenuation Level

(dB down from maximum gain)

[1 bit for every 0.1 dB]

0 dB attenuation = 0

20 dB attenuation = 200

6 1 RESERVE N/A

7 1 Amplifier Network Address 1 to 255

8 1 High Temperature Alarm Threshold 0 to 100 (in

9 1 SSPA module Calibration Mode

Temperature Compensated = 255 (normal state)

Tune Mode = 1 (Factory Use Only)

Calibration Mode = 0 (Factory Use Only)

10 1 SSPA Spare Fault Status

Ignore Spare Fault = 255

Fault on value of window on ADC channel = 0 to 1

Fault on External Mute = 8

11 1 SSPA Spare Fault Handling

Minor Fault (no effect on Summary Fault) = 255

Major Fault (Triggers Summary Fault) = 0

Major Fault with Mute (Transmit Disabled) = 1

12 1 Auxiliary Fault Status

Disabled = 255

Fault High = 0

Fault Low = 1

13 1 Auxiliary Fault Handling

Minor Fault (no effect on Summary Fault) = 255

Major Fault (Triggers Summary Fault) = 0

Major Fault with Mute (Transmit Disabled) = 1

14 1 BUC Fault Status

Enabled = 0

Disabled = 255

15 1 BUC Fault Handling

Minor Fault (no effect on Summary Fault) = 255

Major Fault (Triggers Summary Fault) =0

Major Fault with Mute (Transmit Disabled) = 1

16 1 Protocol Select

Serial = 255

IPNET (Ethernet UDP, Web M&C) = 3

SNMP = 4

17 1 Baud Rate Select

9600 = 255

38400 = 0

19200 = 1

4800 = 2

2400 = 3

18 1 Fiber Optic Fault Status

Disabled = 255

Fault on Logic High = 0

Fault on Logic Low = 1

19 1 Fiber Optic Fault Handling

Minor Fault (no effect on Summary Fault) = 255

Major Fault (Triggers Summary Fault) =0

Major Fault with Mute (Transmit Disabled) = 1

20 1 Standby Mode Hot standby=255; Cold standby=0

(continued)

21 1 BUC Reference Autoswitch = 0; External = 1; Internal = 2

22 1 Forward RF Fault Status

Disabled = 255

Low RF Fault Threshold = 0

RF Window @ 10% = 1

RF Window @ 15% = 2

High RF Threshold = 3

Note: Data length must be at least two bytes to form integer with the lower byte sent first. If an odd number of bytes is received, the last byte

will be saved as the lower byte of the integer and the upper part will be zero.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 81 82

Comments to this Manuals

No comments

Paradise RA 5785 User Manual Page 67

Comments to this Manuals