Paradise RA 5785 User Manual download pdf (Page 33)

Operations Manual, HPA3, Mini Compact Outdoor SSPA 208143 REV - 33

rate is 9600. You will be asked to verify that you wish to change the Baud

Rate. Communication with the amplifier may be affected.

[7] Standby Mode: Selects between Hot and Cold standby mode for units in

redundant systems.

[8] BUC Reference: Selects between an Internal or External reference for an

optional block up coverter integrated with the unit, or allows the unit to Auto-

switch between Internal and External reference.

[9] Attenuation Level: The Gain Adjustment of the unit is adjustable here, from

0 to 20 in 0.1 db steps.

[10] Amplifier Network Address: Sets a network address for the unit. Range

is 0 to 255. You will be asked to verify that you wish to change the

Amplifier Network Address. Communication with the amplifier may be

affected.

[11] Fault Thresholds: Allows the user to set the limit for triggering the unit’s

Current Fault or High Temperature Fault.

Low Current Fault Threshold: This setting is factory pre-set.

High Temperature Alarm Threshold: Range is 0 to 125 °C.

[12] Fault Setup: This feature allows the user to set the Spare Fault Trigger

using the Spare Fault Wizard.

Click on the Spare Fault Wizard button, which opens a new window. See Figure

3-11. Select between the following fault triggers: External Reference Level, LNB

Current, External Mute, or None. Set the range of maximum and minimum

thresholds that would trigger the selected fault, and configure the fault handling

via a pull-down menu. Choose between Major Fault, Major Fault with Mute, and

Minor Fault. Click [OK] to set the fault trigger for the Spare Fault.

Figure 3-11: Spare Fault Wizard

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 81 82

No comments

Paradise RA 5785 User Manual Page 33