Paradise RA 5785 User Manual download pdf (Page 75)

Operations Manual, HPA3, Mini Compact Outdoor SSPA 208143 REV - 75

8.2.3.2 Description of MIB entities

deviceINFO - This field includes general device information.

deviceID - Octet string type; maximum length -60; field specifies device model and serial

number; read only access; OID -1.3.6.1.4.1.20712.1.1

deviceLocation - Octet string type; maximum length 60; filed allow customer to store

information about device physical location or any other textual information related to

the device; read/write access; OID -1.3.6.1.4.1.20712.1.2

deviceRevision - Octet string type; maximum length 60; field specifies device firmware revi-

sion; read only access; OID -1.3.6.1.4.1.20712.1.3

deviceType - Enumeration, integer type; field allows simple detection of SNMP device type.

Values: rmsspa(1), cosspa(2), rcp2fprc(3), rcp21000rm(4), rcp21000co(5),

rcp21000rcp(6), buc(7), minicosspa(8); read/write access. Setting the ID to any other

value will default type to cosspa. OID -1.3.6.1.4.1.20712.1.4

devices - This field is subdivided into 5 branches: paradiseDevice, paradiseDeviceA,

paradiseDeviceB paradiseDeviceC and modem. paradiseDevice branch currently is

used for all Paradise Datacom LLC SNMP enabled devices except Modems. See the

Evolution Modem manual for specific MIB information. Branches for Devices A, B and

C are reserved for future use.

paradiseDevice - Field contents tables hold specific device information: Settings, Thresholds

and Conditions. All table formats follow a common pattern: Index, Value, TextValue.

The threshold table has an additional column for parameter validation. The conditions

table has an extra column for event counters.

The Index column provides general table indexing; the Value column presents the

current value of the relevant parameter; the TextValue column provides information

about parameter name, measurement units and limits.

Value “1” in the validation column of the thresholds table indicates that relevant

parameter is valid under the current system configuration; value “2” indicates that

parameter is invalid or “Not available”.

The event counter column of the conditions table indicates how many times a value of

a relevant parameter changed its state since system power-up.

settings - Table contents current device configuration and provides device management. For

detailed settings table info for SNMP device see Table 8-11 for deviceType =

minicosspa. Read/write access for settingsValue column.

thresholds - Table provides information about device internal limits and subsystems info. For

detailed table information refer to Table 8-12. Read only access.

conditions - Table contents device fault status information. Read only access. For detailed

conditions table info see Table 8-13.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 81 82

No comments

Paradise RA 5785 User Manual Page 75